-
2021-08-25
Matters needing attention when industrial aluminum extrusion press works
In order to produce high-quality aluminum profiles, machinery and equipment must be used, such as industrial aluminum extrusion presses. Of course, you have to master the precautions of its work on this basis, otherwise everything will be in vain. So do you know all the precautions when working with industrial aluminum extrusion presses? To First, check whether the hydraulic system of the industrial aluminum extrusion press is leaking oil and whether the air pressure is normal; at the same time, check whether the auxiliary devices such as the conveyor belt, cooling bed, and storage table are damaged and scratched on the profile. This is to ensure that the aluminum The foundation of the profile surface is intact. To Second, confirm the clamping method according to the shape of the aluminum profile. Large-section hollow profiles can be stuffed with stretch pads, but try to ensure a sufficient clamping area. And before stretching, confirm the length of the aluminum profile, and then predetermine the stretch rate to determine the stretched length. To Generally, when the aluminum profile is cooled to below 50℃, the industrial aluminum profile extruder can be used to stretch the profile; and when the profile is bent and twisted at the same time, the twisting should be corrected first, and then the bending should be pulled to restore a good state. To continue processing. To For the industrial aluminum profile extruder, the two aluminum profiles are all trial pulls, the purpose is to confirm whether the predetermined stretch rate and clamping method are appropriate. At the same time, it is necessary to visually bend, twist, and check the plane gap, flaring, and parallel of the profile. If it is not suitable, adjust the stretch rate appropriately. To If the bending, twisting, or geometric dimensions cannot be eliminated under the condition of normal stretching rate, the operator should be notified to stop the extrusion of the industrial aluminum extrusion press. It can further improve the processing quality, and the profiles on the cooling table cannot rub against each other, collide, stack up, and prevent scratches. MORE
-
2021-08-25
Strengthen the maintenance of the transmission parts of the continuous extruder
Strengthen the maintenance of the transmission parts of the continuous extruder MORE
-
2021-08-25
How does the extruder ensure that the interface is flat and neatly cut the extruded material?
How does the extruder ensure that the interface is flat and neatly cut the extruded material? MORE
-
2021-08-25
The high efficiency and environmental protection of copper profile kneading machine and its kneading matters needing attention
The high efficiency and environmental protection of copper profile kneading machine and its kneading matters needing attention MORE
-
2021-08-25
The difference between copper profile extrusion machine and aluminum profile extrusion machine
The difference between copper profile extrusion machine and aluminum profile extrusion machine MORE
-
2021-08-09
Are there any accessories for the aluminum extrusion press and what should be confirmed before stretching?
Are there any accessories for the aluminum extrusion press and what should be confirmed before stretching? MORE
Foshan Nanhai xinxinke extruder Co., Ltd
Over the years, our company has established a good corporate image in the industry with the business philosophy of establishing a factory in good faith, scientific management and service first, and has become a domestic first-class enterprise with obvious comprehensive advantages and core competitiveness.
Address: No. 3, Kaixuan Road, Songgang Songxia Industrial Park, Shishan town, Nanhai District, Foshan City, Guangdong Province
Mail:xinke@xinkeyeya.com
Fax:0757-85204132
contact us
Foshan Nanhai Xinxinke Extrusion Press Co., Ltd. www.xinkeyeya.com 粤ICP备09143478号